crwdns2915892:0crwdne2915892:0
Are the buttons on your radar not responsive? If so, the button board could be damaged. Follow this guide to replace your button board.
crwdns2942213:0crwdne2942213:0
-
-
Remove the three 1.2 mm Phillips #1 screws on the back of the device.
-
-
-
Pry off the back panel of the radar using the nylon spudger.
-
-
-
Carefully pry the grey frame off the black plastic covering using the nylon spudger.
-
-
-
-
Slowly peel the buttons off the button board.
-
-
-
Detach the orange flap on the motherboard.
-
Carefully remove the motherboard from the grey plastic frame.
-
-
-
Detach the orange flap directly behind the button board.
-
-
-
Carefully pull out the button board from the grey frame.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.