crwdns2915892:0crwdne2915892:0
This guide will show you how to replace motherboard on a Emerson EM744. The tools need for this replacement are a #00 screwdriver, opening tools, spudger, and soldering kit.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips 00 bit to remove two 3mm screws from the bottom of the tablet.
-
-
-
Insert the nylon spudger into the bottom of the tablet, and gently slide it up the side.
-
Pull apart the two sides of the tablet, exposing the circuit board, battery, and other components of the tablet.
-
-
-
-
Use a Phillips 00 bit to remove 3 screws from the top of the tablet.
-
-
-
Disconnect three ribbon connectors from the circuit board with the nylon spudger.
-
-
-
Desolder the positive (red) wire to the positive (+) lead, followed by desoldering the negative (black) wire to the negative lead.
-
Refer to the solder technique guide.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0