crwdns2915892:0crwdne2915892:0
If the tablet has out of focus pictures or doesn't take them at all, this guide will show you how to replace the camera. Tools that are needed will include a Phillips Head screwdriver with a #00 3mm screw, spudger, plastic opening tool, as well as a pair of tweezers to properly remove the broken equipment.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips 00 bit to remove two 3mm screws from the bottom of the tablet.
-
-
-
Insert the nylon spudger into the bottom of the tablet, and gently slide it up the side.
-
Pull apart the two sides of the tablet, exposing the circuit board, battery, and other components of the tablet.
-
-
-
-
Using the spudger to raise the zero insertion force (ZIF) connector to freely release the ribbon.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using tweezers gently pull the ribbon off of the enclosure.
-
Remove the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.