crwdns2942213:0crwdne2942213:0
-
-
Remove 4 Phillips head screws holding on the cover plate and gasket behind it.
-
-
-
-
Remove bottom 9/16 nut that holds the pneumatic tube on the switch.
-
-
-
Attach yellow wire to the top and the black wire to bottom of switch with disconnect.
-
Tighten 1/2 nut on the pneumatic tube until snug.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0