crwdns2915892:0crwdne2915892:0
Use this guide to replace the internal lithium battery inside PlayStation 3 controllers.
crwdns2942213:0crwdne2942213:0
-
-
Remove the five 7.2 mm Phillips screws securing the rear cover to the controller.
-
-
-
Press on the rear cover between the analog sticks and slightly lift the lower edge of it away from the rest of the controller.
-
-
-
-
Push the rear cover slightly toward the top edge of the controller to clear the front edge of the #2 triggers.
-
Pull the rear cover away from the rest of the controller, being careful not to pop off the #2 triggers.
-
-
-
Lift the battery off the motherboard for enough clearance to access the battery connector.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Carefully pull the battery connector away from its socket on the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:0157crwdne2935229:0
crwdns2947412:020crwdne2947412:0
I got the shell separated but unfortunately snapped the lil plastic clip on the rear of the controller's bottom half. a lil super glue and treezers fixed tht up nicely...Thanks for the help
KUDOS to you!!!
Rob (rjmat42)
I have different battery on my second controller, battery itself have pins to connect it with board, no more white plastic holder :/
Try Amazon Cody
whats is amazon cody?
Anyone have any idea where I can find the plastic retainers for the battery? I bought the new one, but my old battery has the clips attached. I don't want this thing just jiggling around in there, it'll drive me nuts.
Thanks.
