crwdns2915892:0crwdne2915892:0
This guide will teach you how to replace the charging port of your device.
crwdns2942213:0crwdne2942213:0
-
-
Remove SIM card tray from the device with a plastic opening tool.
-
-
-
Once SIM card tray is removed press the spudger between the plastic case and the frame of the device until you hear a snap.
-
Work your away around the device until all the plastic clips are undone.
-
-
-
Remove the five screws on top of the device with a T5 Torx.
-
Remove the single screw holding the camera with a T4 Torx.
-
Remove the two screws on the bottom of the device with a T5 Torx.
-
-
-
-
Once the screws are removed, use a plastic spudger and lift up the two plastic pieces that were secured by the screws.
-
-
-
Remove the four T5 Torx screws securing the motherboard.
-
-
-
Gently pry the motherboard out of the frame of the device.
-
-
-
Once the motherboard is free flip it over on its back so all the components are showing.
-
-
-
To fully replace the charging port you need to desolder the port and solder a new one in.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0