crwdns2942213:0crwdne2942213:0
-
-
Parts: (in order from left to right)
-
Short Screws
-
Latch mechanism with latch face
-
Long screws
-
Door knob with peg and screw holes (inside of the room)
-
Door knob with screw holes (outside of the room)
-
-
-
Face the inside of the knob, you should see two Phillips head screws on either side of the central knob.
-
-
-
Remove the door knob on both sides of the door.
-
-
-
You will see the latch face plate (the rectangular piece of metal) where the latch of the door knob is located.
-
-
-
Unscrew the two short screws on the latch face plate.
-
-
-
-
Remove the latch face plate and latch mechanism.
-
-
-
Push the new latch mechanism with latch face plate into the door.
-
-
-
Screw in both short screws of the latch face plate.
-
-
-
Insert the door knob that goes on the inside of the room, aligning the peg and screw holes with the threaded cylinders of the latch mechanism.
-
-
-
Align the door knob that goes on the outside of the room, aligning the peg and screw holes with the threaded cylinders of the latch mechanism.
-
-
-
Screw in both long screws on both sides of the door knob.
-
-
-
Turn the door knob to test your work.
-
-
-
Gather your tools: A new doorknob set, drill, screwdriver
-
-
-
Unscrew the screws on the recent knob and once unscrewed you may know take out the knob from the door.
-
-
-
Takeout and install the new latch: Unscrew the latch assembly and remove the latch mechanism from the door. Then insert the new latch into the hole making sure it is facing the right way.
-
-
-
Next you will be placing the exterior knob on the outside and the interior inside and will secure the screws.
-
-
-
Check if the latch properly works and make sure the door open and closes.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
Why can I not find an interior door knob set that doesn’t have a plate on the latch assembly?
