crwdns2942213:0crwdne2942213:0
-
-
Carefully prise the back cover off the phone.
-
-
-
Remove Battery, SIM Card, and MicroSD
-
Remove the four screws located around the edge of the case. They should be very small phillips heads.
-
-
-
-
Using a flathead screwdriver, carefully prise the black plastic away. It's held in with a series of clips, and should come away easily.
-
-
-
Carefully remove the ribbon cable that connects the capacitive screen to the main board. You need to carefully lift the small tab, then pull the cable out.
-
-
-
Now using the flathead screwdriver, prise the plastic that makes up the front, away from the circuit board. Like the back piece, it has a series of clips around the edge, and should lift free without much effort.
-
-
-
There you have it. Amazingly simple to take apart this phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0