crwdns2915892:0crwdne2915892:0
This guide is a step by step process to remove the top cover of the phone. It is the preliminary step, in order to gain access into the upper section of the phone.
crwdns2942213:0crwdne2942213:0
-
-
Turn off the phone.
-
Check if there is a microSD card in the slot behind the door on the side. If so, remove it by first pushing it in, then pulling it out.
-
Position the phone so that the back side is in view.
-
-
-
Remove the back battery cover.
-
Apply pressure on the cover while simultaneously sliding the cover downward.
-
-
-
-
Insert the iPod opening tool between the base of the phone and the phone battery.
-
Position the phone so that the battery won't fall out of the phone.
-
Carefully lift the battery out of the phone.
-
-
-
Close the phone.
-
Face the front cover forward.
-
-
-
Locate the 4.5 mm notch at the top of the phone.
-
Place the iPod opening tool into the opening.
-
Slightly prop up the top section by lifting the tool.
-
-
-
Wedge the iPod opening tool between the top cover and the phone.
-
Gently lift the top cover away from the phone using the iPod opening tool.
-
This unlatches each hook that connects the top cover to the phone.
-
Place the top cover aside once the top cover is completely disconnected from the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 26-30, Regan Spring 2010 crwdns2935289:0Cal Poly, Team 26-30, Regan Spring 2010crwdne2935289:0
CPSU-REGAN-S10S26G30
crwdns2931471:04crwdne2931471:0
crwdns2935297:017crwdne2935297:0
