crwdns2915892:0crwdne2915892:0
This guide serves to provide the user with information on how to disassemble the Motorola Q700 Sidekick.
crwdns2942213:0crwdne2942213:0
-
-
When looking at the front of the phone, use the Plastic Opening Tool to pry off the four buttons located in each of the corners on the front.
-
-
-
Turn the phone face-down. Remove the back cover, exposing the battery.
-
Use the Plastic Opening Tool to pry the battery out of the phone.
-
-
-
Using the appropriate size Phillips screwdriver, unscrew the four screws located in each of the corners on the back of the device.
-
Although the battery is shown in this picture, please remember to make sure that it is removed in order to proceed with disassembly.
-
-
-
-
After removal of the back screws, use the Plastic Opening Tool to carefully separate the top and bottom halves of the device.
-
-
-
Using the appropriate size Phillips screwdriver, remove any screws that are attached or associated with the keypad and carefully remove keypad from the device.
-
-
-
On the back of the device, you will see individual green and yellow technical pieces. Remove those two pieces from the phone with your fingers and set aside.
-
-
-
You should now have all of the pieces separated and disassembled for your device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
SUNY Cortland, Team 1-4, Getto Spring 2013 crwdns2935289:0SUNY Cortland, Team 1-4, Getto Spring 2013crwdne2935289:0
SUNYCORT-GETTO-S13S1G4
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
