crwdns2915892:0crwdne2915892:0
Use this guide to replace a damaged front cover or to access the inner parts of the camera.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.
-
-
-
On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.
-
Pry up the panel; starting from the front/bottom corner, as indicated.
-
There's a concealed lip, under the opposite edge.
-
-
-
-
Remove three medium length screws from the bottom of the camera
-
-
-
Remove the two medium length screws on the front panel of the camera above the lens mount.
-
Once you done, you may use the Spudger to panel from non-grip side.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 3-41, Regan Winter 2011 crwdns2935289:0Cal Poly, Team 3-41, Regan Winter 2011crwdne2935289:0
CPSU-REGAN-W11S3G41
crwdns2931471:02crwdne2931471:0
crwdns2935297:021crwdne2935297:0
crwdns2944067:02crwdne2944067:0
This should be labelled: Easy.
Okay, there are several steps missing.
