crwdns2942213:0crwdne2942213:0
-
-
Remove 4 screws on the bottom side using Philips screwdriver
-
-
-
Remove 2 buttons by levering them using slot screwdriver.
-
Remove 2 screws.
-
-
-
-
Remove last spanner screw, maybe you can do it using spanner head (pig nose) screwdriver.
-
I have made special key to turn it using piece of 1mm wire and screw.
-
-
-
Now you can see how it looks inside, get access to engine or cable roller.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:09crwdne2935229:0
crwdns2947412:011crwdne2947412:0
Thanks for the photos, came really handy… for those 2 screws hidden under those buttons. It seems that the brushes were faulty and flaming after many years of usage… now again works almost like new…
Thanks for the photos! Those 2 screws hidden under those buttons were undiscoverable.
Miroslav
Thanks! Very GOOD!
anybody can suggest how to do same for Dirt Devil twinfinity model? No spanner screw. Thanks
Hallo, bis Schritt 3 alles okay, dann kann ich aber nicht das Oberteil abnehmen. Da bewegt sich nichts. Muß man da noch was beachten?
