crwdns2915892:0crwdne2915892:0
In this guide you will be removing four screws and unplugging the hard drive. This is a quick easy replacement. You may also need to reinstall windows after completeing the hard drive replacement.
crwdns2942213:0crwdne2942213:0
-
-
Find and remove the two .3cm torx head screws using a T5 screwdriver.
-
Find and remove the six Phillips head .3cm screws using a Phillips #0 screwdriver.
-
-
-
-
Find and remove the four .4cm phillips head screws holding the hard drive in place.
-
-
-
Gently unplug and remove the hard drive
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team S4-G7, Covino Spring 2018 crwdns2935289:0UMass Dartmouth, Team S4-G7, Covino Spring 2018crwdne2935289:0
UMASSD-COVINO-S18S4G7
crwdns2931471:03crwdne2931471:0
crwdns2935297:06crwdne2935297:0
crwdns2947410:01crwdne2947410:0
This was a helpful tutorial, except for two small points. #1 - The yellow & red dots on step 1 are reversed; the T5 screws are the six along the two edges of the back panel and the P0 (Phillips #0) screws are under the face plate. #2 - the battery cable should ALWAYS be unplugged for component safety prior to doing any work on a laptop. An additional safety step (though optional) would be to physically remove the battery from the laptop prior to doing any work on it.
