crwdns2915892:0crwdne2915892:0
As one of the key features of a laptop, the mouse pad is one of the elements of the device that is most likely to suffer wear over time. The right/left click buttons are especially susceptible to wear and tear, as these are mechanical systems connected to electrical boards.
If your left-click or right-click buttons aren't working, you may need to replace the board that controls those functions. Use this guide to learn how!
crwdns2942213:0crwdne2942213:0
-
-
Flip the device over. Unscrew nine marked 7mm Phillips #1 screws.
-
-
-
Remove the keyboard by pushing back the tabs at the marked locations with a spudger or plastic opening tool.
-
-
-
-
Turn the device around so the screen is closest to you. Lift the keyboard and detach the ribbon cable with the spudger.
-
-
-
Remove the keyboard and set it aside. Detach the other ribbon cables with the spudger.
-
Remove five 8mm Phillips #1 screws.
-
-
-
Pry open the laptop with the plastic opening tool.
-
-
-
Under the trackpad, detach the ribbon cables with the spudger.
-
Unscrew two 3mm Phillips #1 screws and lift the board from the pegs.
-
Remove the board from the laptop.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
University of Memphis, Team S2-G1, Kim Fall 2019 crwdns2935289:0University of Memphis, Team S2-G1, Kim Fall 2019crwdne2935289:0
UM-KIM-F19S2G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:03crwdne2935297:0
