crwdns2915892:0crwdne2915892:0
Careful not to mix the screw sizes, some may be too shallow or too deep if inserted into the wrong holes upon reassembly. The keyboard is a single unit and is removed as one piece at the appropriate step.
crwdns2942213:0crwdne2942213:0
-
-
Remove the battery and set it aside, there is a small clip that slides to free the battery.
-
Unscrew the two 4.7mm screws below the battery.
crwdns2952109:0crwdne2952109:0
-
-
-
Remove seven 8.6mm screws from the left and right side of the battery compartment
-
-
-
-
Flip the laptop over and open it up.
-
Using a plastic opening tool carefully pry up along the edge of the plastic bezel at the top of the keyboard.
-
-
-
Remove two 5.5mm screws from the top of the keyboard
-
Using a plastic opening tool push inward along the edges of the keyboard to release the holding clips
-
-
-
Lift the keyboard upwards
-
Using the plastic opening tool push up on the black clip holding the connector ribbon.
-
Pull out the ribbon connector to remove the keyboard.
-
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2935287:0crwdne2935287:0
UMass Dartmouth, Team 1-5, Miles Spring 2016 crwdns2935289:0UMass Dartmouth, Team 1-5, Miles Spring 2016crwdne2935289:0
UMASSD-MILES-S16S1G5
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
