crwdns2915892:0crwdne2915892:0
Once you have removed the back cover and gain access to the internal components of the Dell Vostro 15 5510, once of the components you will be able to replace is the fan. To complete this guide, you will need a Phillips #0 screwdriver head and a plastic opening tool. You will not need to do any difficult steps, but be sure to remove the fan cable carefully.
crwdns2942213:0crwdne2942213:0
-
-
Place the laptop so the bottom cover is facing upwards.
-
-
-
Remove the remaining (M2x4mm) screws with the screwdriver.
-
Loosen the two captive (M2x7.5mm) corner screws with the screwdriver.
-
-
-
Pry open the top left corner of the cover with the opening tool.
-
Pry open the top right corner of the cover with the opening tool.
-
Pry the rest of the cover with the opening tool, working in a clockwise motion until it is completely loosened.
-
-
-
-
Lift the cover to remove it from the rest of the laptop.
-
-
-
Disconnect the fan cable from the system board.
-
-
-
Remove the two (M2x3mm) screws from the fan using the screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 3-5, Saru Jimmy Spring 2023 crwdns2935289:0University of North Texas, Team 3-5, Saru Jimmy Spring 2023crwdne2935289:0
UNT-SARU JIMMY-S23S3G5
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
