crwdns2915892:0crwdne2915892:0
In this guide, we will be showing you how to remove and replace the Palm-Rest.
crwdns2942213:0crwdne2942213:0
-
-
Remove the screw that secures the access panel to the computer.
-
-
-
Remove the access panel from the computer.
-
-
-
Remove the screw that secures the keyboard to the chassis.
-
-
-
Starting on the right side of the system, use a plastic scribe to pry up the keyboard from the computer.
-
-
-
Flip the keyboard over and lay it on the palmrest.
-
-
-
-
Lift the clip to release the keyboard cable and disconnect it from the computer.
-
-
-
Remove the screws that secure the display-hinge cover to the computer
-
-
-
Remove the display-hinge cover from the computer.
-
-
-
Using a plastic scribe pry out the rubber pads that cover the front screws on the base cover.
-
-
-
Remove the screws that secure the palm-rest to the computer.
-
-
-
Disconnect the quick launch board cable, the finger print reader cable, and the palmrest cable from the system board.
-
-
-
Disconnect the power LED cable and the LED board cable from the system board.
-
-
-
Remove the screws that secure the palmrest to the front of the computer.
-
-
-
Pry along the edges of the palmrest to release the palmrest.
-
-
-
Lift the palm-rest up and away from the computer.
-
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0