crwdns2942213:0crwdne2942213:0
-
-
Take screw covers off with a metal spudger
-
-
-
Take the six screws out with the bit driver.
-
-
-
Pop the black plastic panel off with the metal spudger. There are three spots where you should leverage it so that the panel does not break.
-
-
-
-
Remove the plug on the bottom of the screen.
-
-
-
Remove the two screws on the bottom of the computer screen.
-
-
-
Remove the tape and the LCD plug/connector from the back of the screen.
-
-
-
Remove the three screws on the left and right of the screen.
-
-
-
Remove the screen from the metal side frames.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.