crwdns2915892:0crwdne2915892:0
If the keyboard is broken, missing, or malfunctioning you can replace the keyboard of the Dell Precision 5510 in 5 steps by following this guide.
crwdns2942213:0crwdne2942213:0
-
-
Open the system badge flap over to reveal the screws underneath (marked 1 on the image).
-
Remove the 12 screws that secure the base cover to the computer.
-
-
-
Pry the edges base cover and lift it to remove it from computer.
-
-
-
There are two screws on each fan circled in the images shown. Use a Phillips #0 screwdriver to remove all four screws.
-
-
-
Each of the fans are plugged into the motherboard. Use tweezers to pull the plug out.
-
-
-
Carefully extract the fan from its housing bed. It should remove easily if all parts have been disconnected.
-
-
-
-
Unplug the connection that links the battery to the computer.
-
-
-
Remove the four 4.0 mm JIS #0 screws surrounding the battery.
-
-
-
Carefully remove the battery from the computer.
-
-
-
Remove 6 screws to take off the heat sink.
-
-
-
Remove all standalone motherboard screws.
-
8 screws with lengths of either 3.7mm or 4.65mm
-
-
-
Remove nine screws from the back of the keyboard.
-
Screws are 1.9mm in length
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
IUPUI, Team 2-1, Harley Spring 2022 crwdns2935289:0IUPUI, Team 2-1, Harley Spring 2022crwdne2935289:0
IUPUI-HARLEY-S22S2G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:04crwdne2935297:0
crwdns2917034:0crwdne2917034:0
Do you need to remove the heatsink? I don't see why it cant be left on.
