crwdns2915892:0crwdne2915892:0
When a problem exists with the display, wifi, camera, or even the laptop lid itself, it is often easier to just replace the whole screen assembly. This guide is a quick simple way to accomplish this task.
crwdns2942213:0crwdne2942213:0
-
-
Loosen the 8 Philips screws on the bottom of the laptop. They will not come all the way out but loosen till they spin freely.
-
Use a splurger to slowly pry the bottom cover off the laptop. Pull the bottom off in the direction of the arrow.
-
Important Be carefull to not break the snaps as they are delicate.
-
-
-
Important Disconnect the battery before any work is done. Failure to do so could result in electric shock and cause harm to you and the laptop.
-
Carefully use the plastic tab to remove the battery cable from the motherboard.
-
-
-
Unscrew the screw holding the card in place.
-
Remove the metal guard holding the connections in place.
-
Use the splurger to gently lift the wires from the card.
-
-
-
Remove screw holding the metal plate in place.
-
Remove metal plate
-
Carefully pull on the tab to disconnect the display cable from the motherboard.
-
-
-
-
Remove both screws holding the plate in place.
-
Remove plate
-
Remove tape holding the display cable to the laptop.
-
Pull the cable free
-
-
-
Remove both the screws and hing covers on the back of the device.
-
-
-
Remove two screws from the bottom of the device
-
-
-
Remove screws underneath the hinge covers on the back of the device
-
-
-
Carefully remove the display from its slots.
-
Be mindful to feed the WiFi and Display cables through the holes.
-
-
-
The display is now disconnected from the laptop.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:05crwdne2935229:0
