crwdns2915892:0crwdne2915892:0
This guide demonstrates how to remove the WWAN card in your Dell Latitude 7410 laptop.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips screwdriver to loosen the eight captive screws securing the back cover.
-
-
-
Insert an opening pick between the right edge of the back cover and the frame, just below the middle right screw.
-
-
-
Slide your pick along the right edge to release the clips securing the back cover.
-
-
-
Insert your pick between the left edge of the back cover and the frame, next to the speaker cutout.
-
Slide your pick along the left edge to release the clips.
-
-
-
-
Insert your pick between the back cover and the right display-hinge to release the first clip along the back edge.
-
Slide your pick toward the left hinge until the second clip releases.
-
-
-
Insert your pick between the front edge of the back cover and the frame, just to the right of the bottom left screw.
-
Slide your pick toward the right edge until the front edge releases from the frame.
-
-
-
Remove the back cover.
-
-
-
Grab the black pull tab on the head of the battery connector and pull straight up to disconnect it.
-
-
-
Use the flat end of a spudger to pry up the WWAN card cover from its clips on the I/O board.
-
Remove the cover.
-
-
-
Use your Phillips screwdriver to remove the 3 mm screw securing the WWAN cable bracket.
-
Remove the cable bracket.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Guide Team crwdns2935289:0Guide Teamcrwdne2935289:0
Staff
crwdns2931471:09crwdne2931471:0
crwdns2935297:011,963crwdne2935297:0
