crwdns2942213:0crwdne2942213:0
-
-
10 screws hold the bottom cover in place -- these stay in the bottom cover.
-
-
-
Using a spudger will make quick work of this step.
-
-
-
-
Disconnect the battery cable from the motherboard.
-
Remove the 4 screws holding it in place
-
Battery can now be removed from device.
-
-
-
Unplug the fan header
-
Unplug the VGA board cable
-
Unplug the LCD cable
-
-
-
Once these 2 screws are removed the fan will lift out as long as the cables are out of the way.
-
-
-
Loosen the 7 screws in sequential order as labeled on the heatsink [1, 2, 3, 4, 5, 6, 7]
-
Lift heatsink out of device
-
To replace these screws: place the heatsink, line up the screw holes, then tighten the screws in the same sequential order labeled on the heatsink.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
