crwdns2915892:0crwdne2915892:0
Follow this guide to replace the top case of the Dell Inspiron 8600.
crwdns2942213:0crwdne2942213:0
-
-
Remove the battery from the bottom left of the laptop as shown.
-
-
-
Locate the small opening at the upper left of the top blue panel which houses the power button.
-
Use a spudger to lift up and remove the blue panel.
-
-
-
Locate the black tab at the upper right corner of the keyboard, and gently pull the black tab to the left to disconnect the hinge cover.
-
You should now be able to completely remove the hinge cover.
-
-
-
Flip the laptop over and remove the indicated screws.
-
Flip the laptop back over.
-
Find the two places where the display module is attached to the base of the computer.
-
-
-
-
Disconnect the video card from the display module by gently lifting upwards on the black tab.
-
-
-
Lift the display module directly upwards from the base of the computer.
-
-
-
First, remove all tabs using a flat head/ finger.
-
Next, remove all screws using a #1 Philips screwdriver.
-
-
-
Remove all screws on the top of the lcd
-
There all several screw on each side of the LCD. Remove all.
-
-
-
LCD should remove smoothly.
-
The top case will be what remains.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0