crwdns2915892:0crwdne2915892:0
The display module is an essential piece of the Dell Inspiron 8600. If it malfunctions or the screen breaks, its removal from the base may be needed for inspection or/and replacement purposes.
Follow this guide to remove the display module of your Dell Inspiron 8600.
crwdns2942213:0crwdne2942213:0
-
-
Remove the battery from the bottom left of the laptop as shown.
-
-
-
Insert a spudger into the notch at the far left side of the top blue panel and pry the hinge cover off.
-
You may need to pry the other side off as well. You can do this by inserting the spudger between the hinge and the top cover.
-
-
-
Pull the small black tab on the right hand side of the laptop.
-
You have now removed the hinge cover.
-
-
-
-
Flip the laptop over and remove the indicated screws.
-
Flip the laptop back over.
-
Find the two places where the display module is attached to the base of the computer.
-
-
-
Disconnect the video card from the display module by gently lifting upwards on the black tab.
-
-
-
Lift the display module directly upwards from the base of the computer.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0