crwdns2915892:0crwdne2915892:0
This guide shows the process of removing the keyboard from the Dell Inspiron 15-7547.
crwdns2942213:0crwdne2942213:0
-
-
Close the display and flip the laptop on its back.
-
Loosen the ten 5.0 mm-long Phillips #0 screws.
-
The four screws marked with orange will remain captive to the cover.
-
-
-
Use a spudger to pry up and loosen the back cover.
-
Remove the back cover.
-
-
-
Remove the five 5.0 mm-long Philips #0 screws that connect the battery to the case.
-
-
-
Pull the battery cable's pull tab towards the battery to disconnect it from the motherboard.
-
Remove the battery.
-
-
-
Remove the four 5.0 mm-long Philips #0 screws connecting the hard drive to the chassis.
-
-
-
Disconnect the hard drive from the motherboard by placing your fingers at the back, and pulling forward towards the front of the chassis.
-
-
-
Lift the hard drive out of the chassis.
-
-
-
Remove the 3.0 mm-long Philips #0 screw at the end of the Wifi-Card
-
-
-
Remove the Wifi-Card from its socket by pulling away and up from the connector.
-
-
-
Disconnect the white and black cables from the Wifi-Card.
-
-
-
Orient the computer so that the hinge for the display facing away from you.
-
Start removing the speaker on the left by pushing the speaker in the direction of the tick mark on the 2 outer pegs, then upwards
-
-
-
-
Remove the left speaker by pushing the speaker in the direction of the tick mark on the center peg, then upwards
-
-
-
Remove the wire connecting the left speaker to the right speaker.
-
-
-
Start removing the right speaker by pushing the speaker in the direction of the tick marks on the 2 pegs closest to the front of the device, and then upwards.
-
-
-
Remove the right speaker by pushing in the direction of the tick mark on the final peg, and then upwards.
-
-
-
Remove the cable connecting the right speaker to the motherboard by pulling towards the front of the device.
-
-
-
Remove the two 5.0 mm-long Philips #0 screws from the fan.
-
The screw marked in orange will remain captive to the fan.
-
-
-
Disconnect the wire that connects the fan to the motherboard. This can be found under the flap directly to the left of the fan.
-
-
-
Remove the six 7.0 mm-long Philips #0 screws that mount the hinges.
-
-
-
Use a spudger to unlatch and unplug the display cable.
-
-
-
Remove the LCD display assembly from the laptop.
-
-
-
Unlatch the ribbon cable by pulling the white release up.
-
Hold the blue flap and pull to unplug the cable.
-
-
-
Unlatch black release on the ribbon cable.
-
Hold the blue flap to unplug the cable.
-
-
-
Unlatch the ribbon cable by pulling the black release up.
-
Hold the flap and unplug the cable.
-
-
-
Unlatch the ribbon cable by pulling the black release up.
-
Hold the blue flap and unplug the cable.
-
-
-
Remove the seven 3.0 mm-long Philips #0 screws that secure the motherboard.
-
-
-
Remove the motherboard from the laptop.
-
-
-
Remove the five 2.0 mm-long Philips #00 screws from the metal back-plate.
-
-
-
Peal away the two plastic covers marked GPU fan and CPU fan.
-
-
-
Remove the twenty-two 2.0 mm-long Philips #00 screws that connect the keyboard to the chassis.
-
-
-
Lift the the keyboard from the chassis.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Appalachian State University, Team S2-G4, Menagarishvili Fall 2018 crwdns2935289:0Appalachian State University, Team S2-G4, Menagarishvili Fall 2018crwdne2935289:0
APSU-MENAGARISHVILI-F18S2G4
crwdns2931471:03crwdne2931471:0
crwdns2935297:010crwdne2935297:0
crwdns2947410:01crwdne2947410:0
I'm trying to source the 22 , 2.0 mm-long screws that connect the keyboard to the chassis but I dont know what the correct specifications to look for, can someone please help?
