crwdns2915892:0crwdne2915892:0
In this guide, we will be showing you how to remove and replace the Display Assembly.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two screws from the computer base.
-
-
-
Loosen the display cable grounding screw.
-
-
-
Disconnect the display cable from the connector on the system board.
-
-
-
Remove the four screws that secure the display assembly to the computer base.
-
-
-
-
Lift the display assembly off the computer base.
-
-
-
Place the NEW display assembly in position and replace the four screws that secure the display assembly to the computer base.
-
-
-
Route the display cable and Mini-Card antenna cables through the routing guides.
-
-
-
Connect the display cable to the connector on the system board.
-
-
-
Tighten the display cable grounding screw.
-
-
-
Replace the two screws at the bottom of the computer.
-