crwdns2894164:0crwdne2894164:0

crwdns2892376:0crwdne2892376:0

In this guide, we will show you how to remove and replace the Memory Modules.

crwdns2860947:0crwdne2860947:0

crwdns2890040:0crwdne2890040:0

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.
  2. Remove the four screws (M2x3) that secure the battery to the palm rest and keyboard assembly.
    • Remove the four screws (M2x3) that secure the battery to the palm rest and keyboard assembly.

  3. Lift the battery off the palm rest and keyboard assembly.
    • Lift the battery off the palm rest and keyboard assembly.

    • Press and hold the power button for five seconds to ground the system board.

  4. Align the screw holes on the NEW battery with the screw holes on the palm rest and keyboard assembly.
    • Align the screw holes on the NEW battery with the screw holes on the palm rest and keyboard assembly.

  5. Replace the four screws (M2x3) that secure the battery to the palm rest and keyboard assembly.
    • Replace the four screws (M2x3) that secure the battery to the palm rest and keyboard assembly.

  6. Connect the battery cable to the system board.
    • Connect the battery cable to the system board.

  7. WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer.  After working inside your computer, follow the instructions in After Working Inside Your Computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer.

    • Use your fingertips to carefully spread apart the securing clips on each end of the memory-module slot until the memory module pops up.

  8. Remove the memory module from the memory-module slot.
    • Remove the memory module from the memory-module slot.

  9. Align the notch on the NEW memory module with the tab on the memory-module slot.
    • Align the notch on the NEW memory module with the tab on the memory-module slot.

  10. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
    • Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.

    • NOTE: If you do not hear the click, remove the memory module and reinstall it.

crwdns2892372:0crwdne2892372:0

To reassemble your device, follow these instructions in reverse order.

Terrence15

crwdns2886885:018/12/2017crwdne2886885:0

73,600 crwdns2894548:0crwdne2894548:0

crwdns2886889:0442crwdne2886889:0

crwdns2892814:0crwdne2892814:0

Informative Technologies Inc. crwdns2886886:0Informative Technologies Inc.crwdne2886886:0

Community

crwdns2858115:038crwdne2858115:0

crwdns2886889:01,962crwdne2886889:0

crwdns2892924:00crwdne2892924:0

crwdns2892926:0crwdne2892926:0

crwdns2894754:0crwdne2894754:0:

crwdns2894766:024crwdne2894766:0 0

crwdns2894768:07crwdne2894768:0 1

crwdns2894768:030crwdne2894768:0 7

crwdns2894770:0crwdne2894770:0 369