crwdns2915892:0crwdne2915892:0
In this guide, we will be showing you how to remove and replace the Display Assembly.
crwdns2942213:0crwdne2942213:0
-
-
Peel off the tape and disconnect the display cable from the system board.
-
-
-
Note the display cable routing and remove the cable from its routing guide.
-
-
-
Disconnect the antenna cables from the wireless card.
-
-
-
Peel off the tape that secures the antenna cables to the speaker.
-
-
-
Note the antenna cable routing and remove the cables from their routing guide.
-
-
-
Using the pull-tab, disconnect the I/O-board cable from the I/O board.
-
-
-
-
Note the I/O-board cable routing and remove the cable from its routing guide.
-
-
-
Remove the screws that secure the display assembly to the computer base.
-
-
-
Lift the display assembly off the computer base.
-
-
-
Place the NEW display assembly on the computer base and align the screw holes on the display assembly with the screw holes on the computer base.
-
-
-
Replace the screws that secure the display assembly to the computer base.
-
-
-
Route the I/O-board cable through the routing guides on the computer base.
-
-
-
Connect the I/O-board cable to the I/O board.
-
-
-
Route the antenna cables through the routing guides on the computer base.
-
-
-
Adhere the tape securing the antenna cables to the speaker.
-
-
-
Connect the antenna cables to the wireless card.
-
-
-
Route the display cable through the routing guides on the computer base.
-
-
-
Connect the display cable to the system board and adhere the tape.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0