crwdns2915892:0crwdne2915892:0
In this guide, we will be showing you how to remove and replace the Display Assembly.
crwdns2942213:0crwdne2942213:0
-
-
Turn the computer over.
-
Disconnect the Mini-Card antenna cables from the computer base.
-
-
-
Turn the computer over and open the display as far as possible.
-
-
-
Disconnect the display cable and the camera cable from their connectors on the system board.
-
-
-
-
Make a note of the routing of the Mini-Card antenna cables and remove the cables from the routing guides.
-
-
-
Remove the six screws (three on each side) that secure the display assembly to the computer base.
-
-
-
Lift and remove the display assembly off the computer base.
-
-
-
Place the NEW display assembly in position and replace the six screws (three on each side) that secure the display assembly to the computer base.
-
-
-
Route the Mini-Card antenna cables through the slot on the computer base.
-
-
-
Connect the display cable and the camera cable to their connectors on the system board.
-