crwdns2915892:0crwdne2915892:0
This guide will assist you to replace a new touchpad to of your Dell Inspiron 13-7347. Make sure the touchpad that you are replacing is specifically for Dell Inspiron 13-7347. It's very important to find the correct model of touchpad for your Dell Inspiron 13-7347 in order to prevent any troubles. Be sure to use the tools we suggested, and be gentle when you are using the screwdriver. Its very easy to lead to stripped screws if you didn't use the screwdriver correctly or not gentle enough.
Make sure to follow the instructions step by step carefully.
crwdns2942213:0crwdne2942213:0
-
-
Flip the device over, so that the back is facing up.
-
Using a Phillips screwdriver, remove the 10 2.5mm x 8mm screws
-
Use the suction cup to lift off the back case.
-
-
-
Remove the two 2mm x 3mm screws that secure the battery to the device.
-
-
-
Unplug the cable that connects the USB / SD Reader IO Board to the motherboard.
-
-
-
-
Lift the battery steadily from the device.
-
-
-
Unplug the sliding connector.
-
-
-
Remove the four 2.5 mm JIS #00 screws.
-
-
-
Flip the metal plate upward.
-
Take out the metal plate completely.
-
-
-
Remove the touchpad by lifting up the handle.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.