crwdns2915892:0crwdne2915892:0
If you clicked this link from the troubleshooting guide, follow these steps to help get your wireless back up and running.
crwdns2942213:0crwdne2942213:0
-
-
Use tweezers to pry and remove the center screw cover on the back cover.
-
-
-
Use a Phillips screwdriver to unscrew the nine 6.8 mm screws securing the back cover.
-
-
-
Use a spudger to pry around the base edges of the back cover to loosen it from the laptop.
-
-
-
-
Unlock the wide ZIF connector securing the flex cable.
-
Pull the ribbon cable outwards to disconnect the back cover from the motherboard.
-
-
-
Use a Phillips screwdriver to unscrew the three 4 mm screws securing the battery.
-
-
-
Use your fingers (or a set of tweezers) to disconnect the battery cable from the motherboard by gently pulling it towards the battery.
-
Lift and remove the battery from its recess.
-
-
-
Use the phillips screwdriver with the PH000 head to unscrew the 3.8mm screw.
-
-
-
Using the tweezers, pull the white and black wires off of the WiFi Chip.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0