crwdns2915892:0crwdne2915892:0
In this guide, we will show you how to remove and replace the Hard Drive.
crwdns2942213:0crwdne2942213:0
-
-
Loosen the three captive screws that se cure the hard-drive assembly to the computer base.
-
-
-
Using the pull-tab, lift the hard-drive assembly to disconnect it from the connector on the system board.
-
-
-
Lift the hard-drive assembly out of the computer base.
-
-
-
Remove the four screws that secure the hard drive to the hard-drive bracket.
-
-
-
-
Lift the hard-drive off the hard-drive bracket.
-
-
-
Remove the interposer from the hard drive.
-
-
-
Connect the interposer to the NEW hard drive.
-
-
-
Place the hard drive in the hard-drive bracket.
-
-
-
Replace the four screws that secure the hard drive to the hard-drive bracket.
-
-
-
Align the connector on the hard drive with the connector on the system board and press the hard drive until it is fully seated.
-
-
-
Tighten the three captive screws that secure the hard-drive assembly to the computer base.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0