crwdns2915892:0crwdne2915892:0
In this guide, we will show you how to remove and replace the Hard Drive.
crwdns2942213:0crwdne2942213:0
-
-
Loosen the four captive screws that secure the primary hard drive (HDD0).
-
-
-
Using the pull tab, slide the primary hard drive (HDD0) towards the back of the hard drive bay and lift it out.
-
-
-
If your computer has a secondary hard drive (HDD1): 1. Loosen the four captive screws on the secondary hard drive (HDD1). 2. Using the pull tab, lift the secondary hard drive (HDD1) out of the hard drive bay.
-
-
-
Remove the four screws that secure the hard drive bracket to the hard drive.
-
-
-
-
Slide the hard drive out of the hard drive bracket.
-
-
-
Remove the interposer from the secondary hard drive (HDD1), if applicable.
-
-
-
Connect the NEW interposer to the secondary hard drive (HDD1), if applicable.
-
-
-
Slide the hard drive into the hard drive bracket.
-
-
-
Replace the four screws that secure the hard drive bracket to the hard drive.
-
-
-
Place the hard drive in the hard drive bay.
-
-
-
If your computer has a secondary hard drive (HDD1), align and tighten the four captive screws that secure the hard drive to the hard drive bay.
-
Align and and tighten the four captive screws that secure the primary hard drive (HDD0) to the hard drive bay.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
Please can I get a replacement for the graphics card of my alienware M17x R2