crwdns2915892:0crwdne2915892:0
If you need to replace the Wi-Fi card from your Dell Alienware 15 R3, follow this guide.
crwdns2942213:0crwdne2942213:0
-
-
Flip the laptop over so that the backside is facing up.
-
Use a Phillips #00 screwdriver to remove the six 13.0 mm screws from the sides of the back case.
-
Use a Phillips #00 screwdriver to remove one 5.0 mm screw from the back of the laptop.
-
-
-
Use the opening tool to pry the back case from the computer.
-
Use the opening tool and work your way around the perimeter of the back case to gently release the clips.
-
Lift the back case off of the laptop.
-
-
-
-
Use a Phillips #00 screwdriver to remove two screws from the side of the laptop.
-
-
-
Use an opening tool to release the four tabs from the hinge cover and gently pry it off.
-
-
-
Use a Phillips #00 screwdriver to remove nine screws from the chassis.
-
Use a spudger or opening tool to remove the chassis and reveal the battery, fan, motherboard, and other components.
-
-
-
Open the flap to reveal the Wi-Fi card.
-
Use the Phillips #00 screwdriver to remove the screw securing the Wi-Fi card.
-
Use a spudger to detach the coaxial cables from the Wi-Fi card.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 4-1, Saru Jimmy Fall 2022 crwdns2935289:0University of North Texas, Team 4-1, Saru Jimmy Fall 2022crwdne2935289:0
UNT-SARU JIMMY-F22S4G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:07crwdne2935297:0
