crwdns2942213:0crwdne2942213:0
-
-
Flip the laptop over so that the backside is facing up.
-
Use a Phillips #00 screwdriver to remove the six 13.0 mm screws from the sides of the back case.
-
Use a Phillips #00 screwdriver to remove one 5.0 mm screw from the back of the laptop.
-
-
-
Use the opening tool to pry the back case from the computer.
-
Use the opening tool and work your way around the perimeter of the back case to gently release the clips.
-
Lift the back case off of the laptop.
-
-
-
-
Use a Phillips #00 screwdriver to remove two screws from the side of the laptop.
-
-
-
Use an opening tool to release the four tabs from the hinge cover and gently pry it off.
-
-
-
Use a Phillips #00 screwdriver to remove 10 screws from the chassis.
-
Use a spudger or opening tool to remove the chassis and reveal the battery, fan, motherboard, and other components.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0