crwdns2915892:0crwdne2915892:0
In this guide, we will show you how to remove and replace the Primary Hard Drive.
crwdns2942213:0crwdne2942213:0
-
-
Close the display, and turn the computer over.
-
-
-
Remove the screws that secure the base cover to the computer base.
-
-
-
Slide and lift the base cover off the computer base.
-
-
-
Align the tabs on the NEW base cover with the slots on the computer base and slide the base cover into place.
-
-
-
Replace the screws that secure the base cover to the computer base.
-
-
-
Turn the computer over and open the display.
-
-
-
Disconnect the battery cable from the system-board connector.
-
-
-
Remove the screws that secure the battery to the computer base.
-
-
-
Using the battery cable, lift the battery and release it from the tabs on the computer base.
-
-
-
Turn the computer over and open the display as far as possible.
-
-
-
Press and hold the power button for five seconds to ground the system board.
-
-
-
Close the display and turn the computer over.
-
-
-
Align the tabs on the NEW battery with the slots on the computer base.
-
-
-
Align the screw holes on the battery with the screw holes on the computer base.
-
-
-
Replace the screws that secure the battery to the computer base.
-
-
-
Connect the battery cable to the system-board connector.
-
-
-
-
Remove the screws that secure the secondary hard-drive assembly to the computer base.
-
-
-
Carefully lift the secondary hard-drive assembly and then lift the latches to release the secondary hard-drive cable from the system-board connector.
-
-
-
Lift the secondary hard-drive assembly off the computer base.
-
-
-
Turn the secondary hard-drive assembly over.
-
-
-
Remove the screw that secures the secondary hard-drive assembly to the main bracket.
-
-
-
Remove the screws that secure the secondary hard-drive to the secondary hard-drive bracket.
-
-
-
Slide and lift the secondary hard-drive off the secondary hard-drive bracket.
-
-
-
Disconnect the interposer from the secondary hard-drive connector.
-
-
-
Connect the interposer to the secondary hard-drive connector.
-
-
-
Place the NEW secondary hard-drive in the secondary hard-drive bracket.
-
-
-
Align the screw holes on the secondary hard-drive with the screw holes on the secondary hard-drive bracket.
-
-
-
Replace the screws that secure the secondary hard-drive to the secondary hard-drive bracket.
-
-
-
Align the screw hole on the secondary hard-drive assembly with the screw hole on the main bracket.
-
-
-
Replace the screw that secures the secondary hard-drive assembly to the main bracket.
-
-
-
Turn the secondary hard-drive assembly over.
-
-
-
Slide the secondary hard-drive cable into the system-board connector and press down on the connector latches to secure the cable.
-
-
-
Align the screw holes on the secondary hard-drive assembly with the screw holes on the computer base.
-
-
-
Replace the screws that secure the secondary hard-drive assembly to the computer base.
-
-
-
Lift the pull-tab to disconnect the primary hard-drive cable from the system-board connector.
-
-
-
Remove the screws that secure the primary hard-drive assembly to the computer base.
-
-
-
Lift the primary hard-drive assembly off the computer base.
-
-
-
Disconnect the interposer from the primary hard-drive connector.
-
-
-
Remove the screws that secure the primary hard-drive to the primary hard-drive bracket.
-
-
-
Slide and lift the primary hard-drive off the primary hard-drive bracket.
-
-
-
Slide the NEW primary hard-drive into the primary hard-drive bracket.
-
-
-
Align the screw holes on the primary hard-drive with the screw holes on the primary hard-drive bracket.
-
-
-
Replace the screws that secure the primary hard-drive to the primary hard-drive bracket.
-
-
-
Connect the interposer to the primary hard-drive connector.
-
-
-
Align the screw holes on the primary hard-drive assembly with the screw holes on the computer base.
-
-
-
Replace the screws that secure the primary hard-drive assembly to the computer base.
-
-
-
Connect the primary hard-drive cable to the system-board connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.