crwdns2915892:0crwdne2915892:0
In this guide, we will show you how to remove and replace the Battery.
crwdns2942213:0crwdne2942213:0
-
-
Close the display, and turn the computer over.
-
-
-
Remove the screws that secure the base cover to the computer base.
-
-
-
Slide and lift the base cover off the computer base.
-
-
-
Align the tabs on the NEW base cover with the slots on the computer base and slide the base cover into place.
-
-
-
Replace the screws that secure the base cover to the computer base.
-
-
-
Turn the computer over and open the display.
-
-
-
-
Disconnect the battery cable from the system-board connector.
-
-
-
Remove the screws that secure the battery to the computer base.
-
-
-
Using the battery cable, lift the battery and release it from the tabs on the computer base.
-
-
-
Turn the computer over and open the display as far as possible.
-
-
-
Press and hold the power button for five seconds to ground the system board.
-
-
-
Close the display and turn the computer over.
-
-
-
Align the tabs on the NEW battery with the slots on the computer base.
-
-
-
Align the screw holes on the battery with the screw holes on the computer base.
-
-
-
Replace the screws that secure the battery to the computer base.
-
-
-
Connect the battery cable to the system-board connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2947410:01crwdne2947410:0
I took my battery out and lost it. I didn't record the part number. Does anybody around here happen to have it handy?