crwdns2915892:0crwdne2915892:0
This guide will show you how to take off the plastic cover on the saw, so you can get to the inside components.
crwdns2942213:0crwdne2942213:0
-
-
Use a T-20 hexhead screw to unscrew 4 hexagonal screws surrounding the base of the black air filter. The screws are on the yellow portion.
-
-
-
Use a T-15 hexhead screw to unscrew 5 hexagonal screws. These screws are located on the opposite side of the saw from previous step.
-
-
-
-
Unscrew the black plastic knob underneath the trigger.
-
-
-
Grab hold of the black air filter portion and pull off.
-
-
-
This is what the inside of the saw looks like.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.