crwdns2915892:0crwdne2915892:0
This guide will instruct you on how to properly disassemble your Cuisinart-140BK toaster. It will also help your properly replace the knobs on your toaster, while further preventing any damage to the device.
crwdns2942213:0crwdne2942213:0
-
-
Turn the toaster upside down.
-
Unscrew all 4mm screws using Phillips #2 screwdriver.
-
-
-
Turn the toaster right side up.
-
Pull out the toaster lever knobs by pulling it away from the toaster before removing the top cover.
-
-
-
-
Detach the cable that connects the toaster to the circuit board, in both control panels.
-
-
-
Unscrew total of six 4mm screws that attach each circuit board to the top cover, using Phillips #2 screwdriver.
-
Remove and replace the circuit board.
-
-
-
Lift the clear plastic backing off the knob, under the circuit board.
-
-
-
Pinch the back side of the knob to detach it from the toaster.
-
-
-
This is how the device should look without the knob.
-
Repeat the process on the opposite side of the toaster to remove the second knob.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of North Texas, Team S7-G3, Thomas Fall 2017 crwdns2935289:0University of North Texas, Team S7-G3, Thomas Fall 2017crwdne2935289:0
UNT-THOMAS-F17S7G3
crwdns2931471:03crwdne2931471:0
crwdns2935297:03crwdne2935297:0
