crwdns2915892:0crwdne2915892:0
Are you having issues with your Cuisinart Oven's light not turning on? You may need to replace the light's spring. This guide will show you how to.
crwdns2942213:0crwdne2942213:0
-
-
Using a 25-hexagon head screwdriver, unscrew these three 7.31 mm screws.
-
-
-
Using a Phillips #1 screwdriver, remove all of these 7.31 mm screws.
-
Pull off the back panel.
-
-
-
Use a spudger to pull out the grey stoppers.
-
Use a Phillips #1 screwdriver to remove all three 11 mm screws.
-
-
-
Unscrew all of the 11.05 mm screws that connect the outer shell to the interior device.
-
-
-
Push down with a screw driver between the tabs, then pull up to release the tabs. Pull the top piece off.
-
-
-
Unscrew these two screws to detach the light switch from the panel.
-
-
-
Pull the back piece of the switch off of the clicking piece.
-
-
-
Use a metal spudger to pry open the clicking piece.
-
-
-
Remove the broken spring and replace it with the new one.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.