crwdns2915892:0crwdne2915892:0
If your Cosori Pro II shell is cracked or broken and you want to replace it with a new shell, If so here is a guide to take apart your Cosori Pro II for easy shell replacement. For this guide, you will need a plastic opening tool and a Phillips #0 screwdriver head
crwdns2942213:0crwdne2942213:0
-
-
Flip the device upside down and remove all of the Phillips #1 screws.
-
-
-
Use an opening tool to push on the retaining hooks to disengage them while prying slightly.
-
Remove the panel.
-
-
-
-
Use a Phillips #1 screwdriver to remove all four screws.
-
Lift off the bracket.
-
-
-
Use a Phillips #0 screwdriver to remove all the screws connecting to the shell.
-
Dissemble the shell going up to separate the basket holder.
-
-
-
Use a Phillips #0 screwdriver and the 150 mm Flex Extension to unscrew the bottom plastic connecting to the basket holder.
-
-
-
Pull the bottom shell down pulling at the sides to get them over screw holes.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of North Texas, Team 7-1, Kilpatrick Fall 2024 crwdns2935289:0University of North Texas, Team 7-1, Kilpatrick Fall 2024crwdne2935289:0
UNT-KILPATRICK-F24S7G1
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
