crwdns2915892:0crwdne2915892:0
To complete this guide, you will need to disassemble your device and use a soldering iron to replace the battery.
Make sure to power off the device before you begin to take apart your device. Not doing so could potentially cause harm.
crwdns2942213:0crwdne2942213:0
-
-
Use the plastic opening tool help push out the microSD card from the microSD slot.
-
-
-
Use the plastic opening tool to unclip the plastic front from the plastic back. Use the MicroSD slot to initially start the unclipping.
-
-
-
-
The battery is glued onto the black plastic. Use the plastic opening tool to pry the battery from the black plastic.
-
-
-
Unsolder the red and black wires that are connected to the battery from the logic board using a soldering iron.
-
Tips on how to solder can be found here.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
UWT Liner: Group 2 crwdns2935289:0UWT Liner: Group 2crwdne2935289:0
Community
crwdns2931471:04crwdne2931471:0
crwdns2935297:07crwdne2935297:0
