crwdns2915892:0crwdne2915892:0
This is a guide on how to replace the RAM for a Compaq Presario V2000.
crwdns2942213:0crwdne2942213:0
-
-
Loosen the 2 Phillips screws with RAM icons above them. Don’t worry if the screws won’t come out, as they’re attached to the door.
-
Lift the RAM door up and away.
-
-
-
There are two metal clips holding both RAM modules in place.
-
To unclip them, push them both outwards from the RAM stick with your fingers until it pops out and sticks up at an angle.
-
Pull the stick of RAM out.
-
Repeat the last 3 steps for the bottom RAM stick.
-
-
-
-
Start at the bottom slot. Insert the new RAM at the same angle the previous RAM popped out at.
-
Push the RAM in until a click is heard.
-
Repeat the last 2 steps for the top slot.
-
-
-
Repeat the first part of this guide to reinstall the RAM door.
-
If you encounter problems after installing new RAM, redo this guide, or follow a RAM troubleshooting guide.
If you encounter problems after installing new RAM, redo this guide, or follow a RAM troubleshooting guide.
