crwdns2915892:0crwdne2915892:0
The Casio CZ-1000 powers on with the flip of a switch. If you find that your Casio CZ-1000 does not power on due to a broken or malfunctioning power switch, follow this guide for a step-by-step on how to replace it. You’ll need to know how to use basic tools like a soldering iron and a lint-free cloth, as well as some patience if you are new to soldering.
crwdns2942213:0crwdne2942213:0
-
-
Use a Phillips #1 screwdriver to remove the eleven 7.5 mm screws securing the back plate.
-
-
-
Using a Phillips #1 screwdriver, remove all 14 5.5 mm screws from the two motherboards.
-
-
-
-
Carefully cut the zip tie located in the right-hand corner using a pair of scissors or wire cutters.
-
Gently slide all the plugs out of their sockets.
-
-
-
Remove the two 5.5 mm screws holding the power switch to the case using a Phillips #1 screwdriver.
-
-
-
Heat the soldering iron and use a desoldering braid or pump to remove the solder from the pins of the old switch.
-
Once the solder is removed, gently pull the old switch out of its place.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Cuesta, Team 60-3, Krynen Fall 2024 crwdns2935289:0Cuesta, Team 60-3, Krynen Fall 2024crwdne2935289:0
CUESTA-KRYNEN-F24S60G3
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
