crwdns2915892:0crwdne2915892:0
Using a PH00 screwdriver, wire cutters and a soldering station, this guide will show the steps necessary to replace the ball motor.
crwdns2942213:0crwdne2942213:0
-
-
Remove one 9.2mm (0.36 in) screw using the PH00 screwdriver.
-
Remove the battery cover by pulling it away from the vacuum once the 9.2mm (0.36 in) screw is removed.
-
-
-
Remove batteries from the vacuum by pulling them out and away from the vacuum.
-
-
-
Remove all seven 9.2mm (0.32 in) screws on the back of the vacuum.
-
-
-
Remove the front side covers by pulling them away from the vacuum.
-
-
-
Separate the battery compartment from the ball and bead cylinder by sliding the vacuum ball away from the battery compartment.
-
-
-
-
Separate the bead cylinder and the fan compartment by pulling the bead cylinder away from the fan compartment.
-
-
-
Remove the three 11.5mm (0.45 in) screws at bottom of bead cylinder container using the PH00 screwdriver.
-
-
-
Remove the bead cylinder and motor mount from the vacuum ball.
-
-
-
Separate the motor mount from the bead cylinder by pulling the motor mount away from the bead cylinder.
-
-
-
Separate the fan from the motor shaft by pulling the fan away from the motor.
-
-
-
Cut the wires to the faulty motor using wire cutters.
-
-
-
Remove and replace the faulty ball motor with a new one.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
IUPUI, Team S3-G5, Harley Fall 2017 crwdns2935289:0IUPUI, Team S3-G5, Harley Fall 2017crwdne2935289:0
IUPUI-HARLEY-F17S3G5
crwdns2931471:03crwdne2931471:0
crwdns2935297:010crwdne2935297:0
crwdns2917034:0crwdne2917034:0
Thank you for the guide, it helped me successfully repair the top motor that stirs the colored pellets. My son will be so happy to see it working again!
