crwdns2915892:0crwdne2915892:0
Here's how to tell if your Casablanca Intelli Touch W-11 wall switch is working.
crwdns2942213:0crwdne2942213:0
-
-
Connect the hot side of an AC power cord to the Line In to the W-11
-
Connect the neutral side to a light bulb, lamp, etc.
-
Connect the Line Out of the WC-11 to the other side of the light bulb. Use a jumper wire.
-
Connect the oscilloscope leads to the hot and neutral sides of the light bulb.
-
Be sure that all the wiring is secure so that nothing shorts out during the testing.
-
Plug in the AC plug to a 110 volt outlet
-
-
-
Turn on the W-11 power switch.
-
Does the light turn on? If not, check your wiring.
-
Turn off the power, take apart the W-11 and test the power switch with a continuity tester/multimeter.
-
Set up the oscilloscope to observe the AC sine wave.
-
-
-
-
Press the Light button
-
Check the ossilloscope.
-
Do you see the small signal that appears on the rising side of the AC sine wave?
-
-
-
Press the fan button
-
Do you see the signal on the falling side of the AC sine wave?
-
-
-
Press the fan and light switches simultaneously.
-
Do you see the signals on both the rising and falling sides of the AC sine wave?
-
crwdns2915084:0crwdne2915084:0
Global Fixers crwdns2935289:0Global Fixerscrwdne2935289:0
Community
crwdns2931471:033crwdne2931471:0
crwdns2935297:0574crwdne2935297:0
