crwdns2915892:0crwdne2915892:0
This guide shows how to replace the motherboard of the Canon Selphy CP1200. This replacement may be done to replace a faulty motherboard in the event other components are working, and is a required step for replacing other components including the printing mechanism and cooling fan.
crwdns2942213:0crwdne2942213:0
-
-
Unscrew the four 6mm PH000 corner screws.
-
-
-
Unscrew the three 4mm PH1 screws on the bottom of the printer.
-
-
-
Gently pry open the top of the case from either the front or back.
-
Be careful in lifting the top assembly as it is attached to the motherboard at this point.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Keeping the top assembly elevated, detach the ribbon cables connecting the LCD and buttons to the motherboard from the motherboard.
-
The top assembly, containing both the LCD and buttons, will now be completely free
-
-
-
Detach the fan cable from the motherboard.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Detach the ribbon cable leading to the DC in port and battery leads.
-
-
-
Unscrew the three 3mm PH000 screws from the motherboard.
-
-
-
Disconnect the bundled cables leading to the printing mechanism.
-
-
-
Gently lift the motherboard and detach the ribbon cables leading to the print mechanism.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2947410:01crwdne2947410:0
Hi, where can I buy a new motherboard for the Selphy CP 1200 online ?