crwdns2915892:0crwdne2915892:0
User needs PH00 screwdriver, spudger, and plastic pry tool.
crwdns2942213:0crwdne2942213:0
-
-
Rotate the camera to expose the underside of the camera.
-
-
-
Slide the rounded rectangle tab to the left to release the battery cover.
-
-
-
Push the small orange tab forward to release the battery (Battery is ready for removal).
-
-
-
Using the Phillips 00 screwdriver, remove the two 4mm top screws above the LCD screen.
-
-
-
-
Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.
-
-
-
Using the Phillips 00 screwdriver, remove the two 4mm side screws to the left of the LCD screen.
-
-
-
Using the Phillips 00 screwdriver, remove the three 4mm screws from the underside of the camera.
-
-
-
Using the plastic pry tool, remove the back cover from camera.
-
-
-
Using the Phillips 00 screwdriver, remove the two 3mm screws closest to the right of the LCD screen.
-
-
-
Using the Phiillips 00 screwdriver, remove the 4mm screw to the right of the control dial.
-
-
-
Using the spudger, lift the control dial to the right of the LCD screen.
-
-
-
Using the spudger, lift the connection tab and remove the control dial's orange ribbon from motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Eastern Washington University, Team 1-4, Plummer Spring 2015 crwdns2935289:0Eastern Washington University, Team 1-4, Plummer Spring 2015crwdne2935289:0
EWU-PLUMMER-S15S1G4
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
crwdns2917034:0crwdne2917034:0
Gracias gracias gracias
