crwdns2915892:0crwdne2915892:0
Does your screen flicker or simply not turn on? Replacing the LCD screen may solve the problem.
crwdns2942213:0crwdne2942213:0
- 
   
   - 
                     
            Using your fingers, slide the battery compartment door to the right until it unlocks. 
 
- 
                     
            
- 
   
   - 
                     
            Rotate the door along hinges to open. 
- 
                     
            Take out the battery with your fingers. 
 
- 
                     
            
- 
   
   - 
                     
            Remove 2-3.4 mm screws that secure the back panel using a Phillips #000 screwdriver. 
- 
                     
            Remove 4-4 mm screws on the left and right sides of the camera using a Phillips #000 screwdriver. 
 
- 
                     
            
- 
                     
                                                
- 
   
   - 
                     
            Remove 2-4 mm screws that secure the bottom of the camera using a Phillips #000 screwdriver. 
 
- 
                     
            
- 
   
   - 
                     
            Pull back the rubber facing to access the A/V and HDMI output compartment. 
- 
                     
            Remove 1-3.4mm screw inside the compartment using a Phillips #000 screwdriver. 
 
- 
                     
            
- 
   
   - 
                     
            Once all screws are removed, pull the back facing off with your fingers. 
 
- 
                     
            
- 
   
   - 
                     
            Remove 3-4.4 mm screws that secure the small metal plate using a Phillips #000 screwdriver. 
 
- 
                     
            
- 
   
   - 
                     
            Carefully pop out the LCD screen with your fingers. 
 
- 
                     
            
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
