crwdns2915892:0crwdne2915892:0
Use this guide to replace the control panel in your camera.
crwdns2942213:0crwdne2942213:0
-
-
Remove the two 2mm black screws that are located on the underside of the camera.
-
Remove the two 3mm silver screws from the right side of camera.
-
-
-
Remove the 2mm screw from the back of the camera.
-
Remove two 2mm screws from the bottom of the camera.
-
Remove two 2mm screws the left side of camera.
-
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Use the tweezers to pull up on the piece of black plastic connected to the ribbon to unhook and remove the ribbon connected to the screen.
-
-
-
Turn the camera over to the side with the lens and remove the ribbon on the left side.
-
After removing the ribbon there will be a second ribbon to remove that was hiding underneath the first ribbon.
-
-
-
Lift up the button that connects to the power button of the camera so you can remove the control panel.
-
-
-
Remove the control panel from the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
University of North Texas, Team S5-G3, Thompson Fall 2018 crwdns2935289:0University of North Texas, Team S5-G3, Thompson Fall 2018crwdne2935289:0
UNT-THOMPSON-F18S5G3
crwdns2931471:04crwdne2931471:0
crwdns2935297:05crwdne2935297:0
